STARTER PACK FOR HALS 3-D TRIAL PRINTING

We are ready to provide you with HALS STARTER PACK for your trial printing, and we have already shipped HALS STARTER PACK to more than 40 countries customers.

Contents of HALS STARTER PACK

1.HALS LENS SHEET :

Honeycomb Series : 0.25mm PP / 0.3mm PP
Square Series : 0.4mm PP / 0.4mm PET

2. HALS QUICK MANUAL PDF File (English and Spanish) with CDR

Details : Information about HALS Lens Sheet
How to make HALS design, prepress and Printing

3. HALS Pattern (Floating and Sinking HALS pattern each 10 Patterns) with CDR

*Unlike lenticular, HALS does not need to use special 3-D graphics software, you can create HALS design by using Adobe Illustrator.

HALS LENS SHEET
HALS Quick Manual
HALS Pattern

　

Remarks

  • Sheet Size : 508mm x 720mm
  • Minimum Order Quantity :
    Honeycomb Series (0.25mm PP / 0.3mm PP) : 1,050 sheets
    Square Series (0.4mm PP / 0.4mm PET) : 1,000 sheets
  • Trade Terms : FOB Tokyo Japan
  • Freight : Collect
  • Payment : By T/T Remittance in advance in US Dollar
  • Delivery : By Sea-Freight or by Air-Freight or by EMS
  • Time of Delivery : Within 10 days after receipt of T/T Remittancee

    • * We will suppy HALS STARTER PACK CDR to you, which incude HALS Patterns, PDF file of HALS Quick Manual and HALS Design samples, when we ship HALS Lens Sheet to you.

    Bank Information

    Bank: MITSUI-SUMITOMO BANK

    Branch: ASAKUSA (Branch Code : 230)

    Address: 2-17-2, Kaminarimon, Taito-ku, Tokyo 111-0034 Japan

    Account No.: 207987

    Swift Code: SMBCJPJT

    Beneficiary: GRAPAC JAPAN CO., INC.

    Contact us

    GRAPAC JAPAN CO., INC.

    e-mail : sales@grapac.co.jp

    Address : 2-7-38 Tsutsumi-dori, Sumida-ku, Tokyo 131-0034, Japan

    Tel : +81-3-5630-1185

    Fax : +81-3-5630-1186

    Recommended Condition for HALS printing

    1. Technical Staffs who have appropriate know-how and technique in printing.
    2. An offset press 28 inches or wider, with curing unit installed.
    3. A CTP, output resolution 2,400 dpi, 4,000 dpi or higher.
    4. Experience in printing on transparent materials.